A Quick Guide to the iDekUSA Pocket/Universal Dek™

1: Quikclik™ your Dual Pocket/Universal Dek™ into place on your press. To do so, position the Pocket/Universal Dek™ (silicone pads in front) over the Quikclik™ plate. Line up the holes on the bottom of the Dek™ to match circular dowels of the Quikclik™ plate. When the Dek™ and plate are paired, push the Dek™ toward the press to lock it into place.

The Pocket/Universal Dek™ is compatible with all models of the iDek heat press and can be used on both pedestals.

(Press with Pocket Dek™)

2: Set the amount of pressure desired by turning the height adjustment knob located on the underside of the pedestal. Move the upper heat Dek™ over the pocket Dek™. Bring the handle to the lowered position to test tension. Adjust accordingly. Raise the heating element and slide the arm away from the pocket Dek™.

3: Take hold of the garment by the edges of the pocket's opening and slide the pocket onto the Dek™. An over/under loading technique is recommended to keep the garment in place. If processing two at one time, repeat the process for the additional pocket.

(Loaded Pocket)

4: Place your transfer(s) on the pocket(s).

5: Slide the heating element into position and press the pocket(s). Press according to manufacturer’s time and temperature guidelines.

The 5” x 5” Universal Dek™ is suitable for custom or hard to press items. Suggested uses include: “tag less tee” labeling; button down, polo, and zip shirts; tote bags or anything that has a heat or pressure sensitive part that needs to fall out of the way of the heat Dek™.


          Loaded Polo, Buttons fall out of the way.               Loaded T-shirt neck for tagless-tee labeling.